YJD-HX Star Shaped Unloader

The YJD-HX star shaped unloader has a significant impact on high temperature and lubrication due to the distance between the bearings and gearbox from the housing.

The YJD-HX star shaped unloader has a compact structure, smooth operation, and low noise. Due to the distance between the bearings and gearbox from the housing, it has a significant impact on high temperature and lubrication. Widely used in industrial sectors such as environmental protection, metallurgy, chemical industry, grain, and food.

Precautions for using YJD-HX star shaped unloader:

1. Before using the YJD-HX star shaped unloader, check the quantity and type of lubricating oil in the reducer, replace it with new oil after one month of operation, and replace it once a year thereafter;

2. Connect the air source interface and check if it is blocked by foreign objects, ensuring that the interface is clean;

3. Before using the star shaped unloader, make sure that the rotation direction of the rotor is clockwise (when viewed from the shaft end extending from the reducer, it is consistent with the arrow on the sprocket cover);

4. Before using the star shaped unloader, open the sprocket cover to check the tension of the chain. Regular checks should be conducted during the operation of the YJD-HX star shaped unloader; Apply appropriate lubricating grease to both the chain and sprocket at the same time;

5. During the whole use of the discharger, it is advisable to adjust the pressure reducing valve so that the pressure at the seal is 0.05MPa higher than the material pressure in the valve body. The gas is oil-free, dry compressed air;

6. During the entire use of the star shaped unloader, the air source at the sealing point is always present. Only after confirming that the valve is shut down can the air source be turned off.