At-Ltc Series Filter Cartridge Dust Collector

The AT-LTC series filter cartridge dust collector is widely used in industries such as building materials,electricity,light industry,metallurgy,chemical industry,tobacco,shipbuilding,etc.due to its advantages of small footprint,dust removal,energy saving,infrastructure investment saving,convenient maintenance,and long service life.Compared with bag filters,the filter dust collector series is a new generation product and an ideal replacement for bag filters.

Installation requirements:

1.The box and ash hopper are locked and leveled by positioning bolts,and welded on site without air leakage.

2.There shall be no air leakage between the pulse valve and the connecting pipe.

3.Installation of filter cartridge

First,open the side cover plate,remove the spray pipe,hold the upper opening of the filter cartridge with your hand,and fix the filter cartridge into the filter chamber through the frame;Then tightly fit the filter cartridge into the flower plate hole,tighten the bottom fixing bolt,and make the filter cartridge tightly fasten to the flower plate;Recheck the sealing between the cylinder mouth and the flower plate hole;After installing the spray pipe,adjust the spray pipe to align the spray hole with the filter bag opening,fix the nut on the spray pipe,and cover the cover plate.

Product Features:

1.Excellent filtering materials for dust removal;

2.Can be used as a dust collector and is also suitable for dust removal systems in various working conditions;

3.Solved the filtration problems of coalescing,humid,and fibrous dust;

4.Simple structure,small external volume,space saving,easy maintenance,and long service life;

5.The modular combination structure allows for a wide and flexible selection of filtration area,processing air volume,and external dimensions,;

Working Principle:

The filter cartridge dust collector operates under negative pressure,and the dusty gas enters the box through the inlet.Under the action of negative pressure inside the folding filter cartridge,the gas passes through the filter material from outside the cartridge and enters the cartridge.It enters the clean air chamber and is discharged from the outlet.When the dust accumulates more on the surface of the filter material and the resistance increases(which can also be set by time),the pulse valve opens,and compressed air is directly sprayed into the filter cartridge to perform sequential pulse cleaning of the filter cartridge,sweeping the dust trapped on the surface of the filter cartridge.Dust follows the main airflow and falls into the ash hopper under the action of gravity,restoring low resistance operation.