Activated Carbon Adsorption Tower

Activated carbon adsorption tower is the best purification equipment for treating organic waste gas and odor. Activated carbon adsorption is an effective measure to remove odors, natural and synthetic dissolved organic matter, micropollutants, etc. from water.

Most of the relatively large organic molecules, aromatic compounds, halogenated alkynes, etc. can be firmly adsorbed on the surface of activated carbon or in the voids, and have obvious removal effects on humus, synthetic organic matter and low molecular weight organic matter. As a deep purification process, activated carbon adsorption is often used for the final treatment of wastewater, and can also be used for the purification treatment of long-term production water and domestic water.

When there is a lot of dust and particulate matter, the activated carbon adsorption device can be used with the water curtain machine, water spray tower and UV plasma at the same time to achieve exhaust gas purification and discharge.

The activated carbon adsorption device is mainly composed of an activated carbon layer and a support layer.

Activated carbon has well-developed voids, large specific surface area, and high adsorption capacity. It is precisely because of this characteristic of activated carbon that it is widely used in the deep treatment of water, such as domestic water supply and deep treatment of sewage in the later part of the (purified water).

Dusty gas is powered by a fan, positive or negative pressure enters the tower, because there is unbalanced and unsaturated molecular gravity or chemical strength on the solid surface of activated carbon, so when the solid surface is in contact with the gas, it can attract gas molecules, make it concentrate and keep on the solid surface, pollutants are adsorbed, and the exhaust gas enters the equipment dust exhaust system after the filter, and the purified gas is discharged at high altitude.

1. High adsorption efficiency, large adsorption capacity, wide application area

2. Easy maintenance and no technical requirements

3. Large specific surface area, good selective adsorption

4. Activated carbon has the characteristics of wide range of sources and low price

5. High adsorption efficiency and strong ability

6. Easy to operate.

After a period of use, activated carbon adsorbs a large amount of adsorbent, gradually tends to saturate, loses its working ability, and will penetrate the filter layer in severe cases, so activated carbon should be regenerated or replaced.